The flexible anchor rod FIS A.

Threaded rod FIS A

The fischer threaded rod FIS A is a system component for use with the fischer injection mortars FIS PM, FIS SB, FIS EM Plus, FIS EB, FIS V, FIS VL, FIS P Plus, FIS P, and FIS Green. In accordance with the relevant approval of the injection mortar used, the threaded rod is suitable for the fixation of steelwork constructions, staircases, and machines into numerous building materials both inside and outside. The extensive assortment in diameters M6 - M30, different lengths, and different steel grades enables extremely diverse applications. The approvals of the various injection mortars must be observed.

Product variants

Download of image data

Product variants

Approvals / Test reports

77 Product variant (s)

ETA dyn

Drill diameter

Thread

Packaging

Amount

GTIN (EAN-Code)

Legend = Permission Available— = Permission not Available

More results

Viewed 18 of 77 variant (s)

Advantages

The threaded rod FIS A can be used with almost every fischer injection mortar (except Highbond special mortar FIS HB). It can be individually selected based on requirements, thus allowing for a wide range of applications.
The wide range of approved threaded rods FIS A from M6 to M30 allows for various applications.
Please refer to the approvals of the injection mortar used.

Applications

Anchorings with the injection mortars FIS PM, FIS SB, FIS EM Plus, FIS EB, FIS V, FIS VL, FIS P Plus, FIS P, and FIS Green

Building materials

In connection with several fischer injection mortars the threaded rod FIS A is approved or suitable for different building materials.

You can find detailed information on building materials in the registration document.

Approvals

ETA-02/0024
ETA-19/0501
ETA-20/0603

Functioning

The threaded rod FIS A is suitable for pre-positioned and push-through installation.
FIS A is set manually into the drill hole, by lightly rotating it until it reaches the drill hole base.

ETA Certification Document

pdf, ETA-02/0024

European Technical Assessment for Injection System fischer FIS V - Bonded anchor for use in concrete

Created on 05/13/2020

ETA Certification Document

pdf, ETA-19/0501

European Technical Assessment for fischer Superbond dynamic - Post-installed fasteners in concrete under fatigue cyclic loading

Created on 06/11/2024

ETA Certification Document

pdf, ETA-20/0603

European Technical Assessment for Injection System fischer FIS V Plus - Bonded anchor for use in concrete

Created on 11/13/2020

System components

Hammer drill bit Quattric II
74 variants

ETA-approval
ETA dyn	—
Drill diameter ( d₀ )	8 mm
Thread ( M )	M6
Packaging	Folding box
Amount	10 St.
GTIN (EAN-Code)	4006209462041

ETA-approval
ETA dyn	—
Drill diameter ( d₀ )	8 mm
Thread ( M )	M6
Packaging	Folding box
Amount	20 St.
GTIN (EAN-Code)	4006209902431

ETA-approval
ETA dyn	—
Drill diameter ( d₀ )	8 mm
Thread ( M )	M6
Packaging	Folding box
Amount	20 St.
GTIN (EAN-Code)	4006209902721

ETA-approval
ETA dyn	—
Drill diameter ( d₀ )	10 mm
Thread ( M )	M8
Packaging	Folding box
Amount	10 St.
GTIN (EAN-Code)	4006209902745

ETA-approval
ETA dyn	—
Drill diameter ( d₀ )	8 mm
Thread ( M )	M6
Packaging	Folding box
Amount	20 St.
GTIN (EAN-Code)	4006209902738

Threaded rod FIS A

Product variants

The advantages / Product description

Application and approval

Assembly instruction

Documents for download