The undercut anchor for thin façade panels, such as HPL and fibre cement.

Zykon-Panel anchor FZP II T PA

The concealed fixing solution for thin façade panels, such as HPL, fibre cement and solid surface panels. Use in conjunction with clasps systems on façades or with other attachments.

Varianti del prodotto

Download of image data

Varianti del prodotto

Approvazioni / rapporti di prova

5 Varianti del prodotto

Min. panel thickness

Total length

Thread

Cylindrical diameter

Undercutdiameter

Amount

Legenda = Omologazione disponibile— = Omologazione non disponibile

Visualizzate 5 di 5 varianti

Advantages

The anchor’s short geometry allows it to be used in thin panels with a thickness greater than 8 mm.
The fixing of the undercut anchor is not visible on the exposed side, creating a visually attractive and consistent façade surface.
The adapted shape of the undercut anchor ensures a positive-locking attachment free from expansion pressure in a conical undercut drill hole.
Setting the anchor using undercut technology allows the user to always select the optimal structural position in the façade panel. This greatly reduces panel deflection.
The positive-locking anchor is free from expansion pressure provides much better holding force than commonly available systems and allows for the use of large-format panels.

Functioning

Use dry drilling with a diamond drill bit - first cylindrical, then conical - to drill an undercut hole.
When the undercut anchor is installed, an optimal, positive-locking connection is created between the expanding part and the drill hole.
The anchor is installed flush to the absolute anchoring depth. After the anchor is set, the spacer washer will be in full contact with the surface of the material.

Installation FZP II T PA

1 / 4

ETA-approval
Min. panel thickness	8 mm
Total length ( l )	18,5 mm
Thread ( M )	M6
Cylindrical diameter	11 mm
Undercutdiameter	13,5 mm
Amount	250 St.
GTIN (EAN-Code)	4048962362053

ETA-approval
Min. panel thickness	8 mm
Total length ( l )	20,5 mm
Thread ( M )	M6
Cylindrical diameter	11 mm
Undercutdiameter	13,5 mm
Amount	250 St.
GTIN (EAN-Code)	4048962362060

ETA-approval
Min. panel thickness	8 mm
Total length ( l )	18,5 mm
Thread ( M )	M6
Cylindrical diameter	11 mm
Undercutdiameter	13,5 mm
Amount	250 St.
GTIN (EAN-Code)	4048962168471

ETA-approval
Min. panel thickness	10 mm
Total length ( l )	22,5 mm
Thread ( M )	M6
Cylindrical diameter	11 mm
Undercutdiameter	13,5 mm
Amount	250 St.
GTIN (EAN-Code)	4048962168495

ETA-approval
Min. panel thickness	12 mm
Total length ( l )	21,5 mm
Thread ( M )	M6
Cylindrical diameter	11 mm
Undercutdiameter	13,5 mm
Amount	250 St.
GTIN (EAN-Code)	4048962168518

Zykon-Panel anchor FZP II T PA

Varianti del prodotto

Vantaggi / descrizione del prodotto

Applicazioni e Certificazioni

Istruzioni di montaggio

Documenti da scaricare