• Products
  • Service
  • Company
Zykon panel anchor FZP II
  • Product Category Picture: "Zykon-Panel anchor FZP II VS"
  • Application Picture
  • Application Picture
    • Application Picture
    • Product Category Picture
    • Application Picture
      The suspension anchor with the fischer Vertical Solution for natural stone or artificial concrete panels.

      Zykon-Panel anchor FZP II VS

      The concealed stand-off installation solution using undercut anchors for heavy natural stone façade panels. This anchor can only be used with the fischer Vertical Solution subframe system. Suspension brackets designed based on a lock and key principle are used to install the undercut anchors. This technology defines a constant distance between the front of the panel to the connection face on the FZP II anchor (RWT = remaining wall thickness) as a reference dimension for drilling. This technology can be used to compensate panel thicknesses and create a flat façade surface by stand-off installation anchors.
      Product variants
      Download of image data

      Product variants

      Filter
      Filter
      Approvals / Test reports
      3 Product variant (s)
      Min. panel thickness
      Total length
      Thread
      Cylindrical diameter
      Undercutdiameter
      Amount
      Legend = Permission Available— = Permission not Available
      Viewed 3 of 3 variant (s)

      The advantages / Product description

      Advantages
      • The adapted shape of the undercut anchor ensures a positive-locking attachment free from expansion pressure in a conical undercut drill hole.
      • The fixing of the undercut anchor is not visible on the exposed side, creating a visually attractive and consistent façade surface.
      • Setting the anchor using undercut technology allows the user to always select the optimal structural position in the façade panel. This greatly reduces panel deflection.
      • The anchor allows for higher pull-out loads, compared to commonly available systems.
      • Using a constant remaining wall thickness as a reference value when drilling holes allows users to compensate panel thickness tolerances.

      Application and approval

      Applications
      • Exterior façades with high aesthetic requirements and a reduced wall construction
      • Interior façades with high aesthetic requirements and a reduced wall construction
      Building materials
      • Natural stone (>20mm)
      You can find detailed information on building materials in the registration document.
      Approvals
      • ETA-11/0145
      • DoP No. 0307

      Assembly instruction

      Functioning
      • Wet diamond drilling - first cylindrical to a constant reference dimension for the remaining wall thickness (RWT), then conical to create an undercut drill hole.
      • When the undercut anchor is installed, an optimal positive-locking connection is created between the expanding part and the drill hole.
      • The anchor is installed in the conical undercut drill hole using stand-off installation.
      • The ability to compensate panel thickness tolerances helps create a flat façade surface.
      • Suspension brackets designed based on a lock and key principle are also used during installation.
      Installation
      1 / 6
      • 1
        Installation
      • 2
      • 3
      • 4
      • 5
      • 6

      Documents for download

      • ETAs and DoPs
      ETA Certification Document
      pdf, ETA-11/0145
      European Technical Assessment for fischer-Zykon-panel anchor FZP II - Fastener for the rear fixing of facade panels made of selected natural stones according to EN 1469:2015
      Created on 08/22/2024
      DOP - Declaration of Performance
      pdf, DoP No. 0307
      Declaration of Performance for fischer Zykon-panel anchor FZP II
      Created on 07/01/2022
      cd-green-58bb58464c-tb9pl