• Products
  • Service
  • Company
Hammerset
  • Product Category Picture: "TermoZ CNplus"
  • Application Picture
  • Application Picture
  • Application Picture
    • Application Picture
    • Product Category Picture
    • Application Picture
    • Application Picture
      The premium ETICS hammerset fixing with the option to be screwed in.

      TermoZ CNplus

      The fischer TermoZ CNplus is ideal for securely fixing pressure-resistant insulation up to 340 mm thick, such as polystyrene boards and mineral wool boards. The European Technical Assessment guarantees secure hold and regulates the use in all building material classes and insulation types. The TermoZ CNplus is set with a hammer. Alongside the small drill hole depth, this saves time and money during installation. However, it can also be screwed into the anchoring base. The flexible hammerset is placed exactly flush to the surface or countersunk, depending on the desired application. The TermoZ CNplus can also be adjusted with the screwdriver and removed without problems.
      Product variants
      Download of image data

      Product variants

      Approvals / Test reports
      15 Product variant (s)
      Drill diameter
      Anchor length
      Effect. anchorage depth
      Max. usable length at surface-flush installation
      Min. total drill whole depth incl. insulation at surface flush installation
      Max. usable length at countersunk installation
      Legend = Permission Available— = Permission not Available
      Viewed 15 of 15 variant (s)

      The advantages / Product description

      Advantages
      • TermoZ CNplus is a hammerset anchor with the option to be screw set. The plug is suitable for all building material and insulation types. Through the flexible use the warehouses and ordering processes are reduced.
      • With the fast and simple hammerset installation the plugs set too deep can be readjusted with the aid of the screwdriver. This saves working time and helps to avoid fixing marks.
      • During the screw installation the TermoZ CNplus can be set countersunk or flush. For different set results only one plug is required.
      • Moreover the screw installation enables an accurate setting due to an optimum application on the insulation surface. Also with soft insulation.
      • The compound nail ensures a high energy efficiency with the countersunk screw installation, because there is nearly no heat transmission.

      Application and approval

      Applications
      • Attachment of ETICS insulating boards on concrete and masonry
      • Flush installation in ETICS insulating boards, e.g. polystyrene and mineral wool
      • Countersunk installation in ETICS insulating boards, e.g. polystyrene and mineral wool, incl. a closing cap for covering
      Building materials
      • Building material classes A, B, C, D, E
      • Concrete
      • Full blocks made from concrete
      • Building brick
      • Solid sand-lime brick
      • Hollow blocks made from lightweight concrete
      • Vertically perforated brick
      • Perforated sand-lime brick
      • Lightweight aggregate concrete
      • Aerated concrete
      You can find detailed information on building materials in the registration document.
      Approvals
      • ETA-09/0394
      • DoP No. 0326
      • EPD-FIW-20210314-CBD1-EN

      Assembly instruction

      Functioning
      • The plug is set in push-through installation.
      • Simple, fast setting by driving the compound nail in using a standard hammer.
      • The setting process with the screwdriver is performed flush with a standard Bit T 25.
      • For countersunk installation the setting tool CNplus is required. The insulation disk is covered with a closing cap.
      • Non-load bearing layers, such as adhesive and old plaster, are included in the maximum useful length.
      Standard: Flush to surface hammerset installation
      1 / 4
      • 1
        Standard: Flush to surface hammerset installation
      • 2
      • 3
      • 4
      Standard: Flush to surface screw installation with TX25 bit
      1 / 4
      • 1
        Standard: Flush to surface screw installation with TX25 bit
      • 2
      • 3
      • 4
      Standard: Countersunk screw installation with setting tool CNplus
      1 / 5
      • 1
        Standard: Countersunk screw installation with setting tool CNplus
      • 2
      • 3
      • 4
      • 5
      Alternative: Flush to surface screw installation with setting tool CNplus
      1 / 4
      • 1
        Alternative: Flush to surface screw installation with setting tool CNplus
      • 2
      • 3
      • 4

      Documents for download

      • ETAs and DoPs
      • Sustainability
      ETA Certification Document
      pdf, ETA-09/0394
      European Technical Assessment for fischer TermoZ CN 8 / fischer TermoZ CN 8 R / fischer TermoZ CNplus 8 - Nailed-in plastic anchor for fixing of external thermal insulation composite systems with rendering in concrete and masonry
      Created on 10/18/2022
      DOP - Declaration of Performance
      pdf, DoP No. 0326
      Declaration of Performance for fischer termoz CN 8 / fischer termoz CN 8 R / termoz CNplus 8 R (Plastic anchors for use in concrete and masonry)
      Created on 10/31/2022
      cd-green-58bb58464c-md8rj