• Products
  • Service
  • Company
Bolt anchor FBN II GS
  • Product Picture: "fischer bolt anchor FBN II 12/200 GS with large washer"
  • Application Picture
  • Application Picture
  • Application Picture
    • Application Picture
    • Product Picture
    • Application Picture
    • Application Picture
      Art.-No. 45585

      fischer bolt anchor FBN II 12/200 GS with large washer

      Product variants
      Download of image data
      Top Features
      • The large washer increases the size of the supporting surface. For the fixing of timber constructions.
      • Pre-assembled washer saves time during installation.
      • The FBN II achieves maximum load-bearing capacity with standard anchorage depth. This means: fewer fixing points and smaller anchor plates.
      • If the reduced anchorage depth is used, then this lowers the drill hole depth and simplifies installation.
      • Component tolerances are balanced out with the long thread. In addition, FBN II is also suitable for stand-off installations. This increases flexibility.

      The advantages / Product description

      The cost-efficient fixing with large washer for flexible use in non-cracked concrete.
      Advantages
      • The larger washer included with the FBN II GS creates a large supporting surface and, as such, allows for use in wood construction.
      • The pre-fitted washer ensures a fast assembly.
      • The standard anchorage depth achieves the maximum load-bearing capacities. This means that fewer fixing points and smaller anchor plates are required.
      • The anchor is also ideal for large fixture thicknesses.
      • The long thread balances component tolerances and stand-off installations, and thus increases flexibility.
      • Fewer hammer blows and the minimal torque slippage allow for a noticeably simpler assembly.
      • The drive-in pin protects the threaded screw from damage, and as such ensures a faster installation and dismantling of the fixture.
      The fischer bolt anchor FBN II GS with its large washer is a steel anchor for cost-effective fixations in non-cracked concrete. With its large pre-mounted washer, the zinc-plated steel anchor is recommended for the fastening of footing beams and sills as well as for other wood constructions. Thanks to its long thread and the two anchorage depths, the fischer bolt anchor FBN II is particularly flexible. In addition to pre-positioned and push-through installation, the bolt anchor is suitable for stand-off installation.

      Application and approval

      Applications
      • Anchor plates with slotted holes
      • Façade sub-structures with slotted holes
      • Timber constructions
      • Tension anchor
      • Anchoring of wooden beams
      Building materials
      Approved for:
      • Concrete C20/25 to C50/60, non-cracked
      Also suitable for:
      • Concrete C12/15
      • Natural stone with dense structure
      You can find detailed information on building materials in the registration document.
      Approvals
      • ETA-07/0211
      • DoP No. 0192

      Assembly instruction

      Functioning
      • The FBN II GS is suitable for pre-positioned and push-through installation; also suitable for stand-off installation under certain conditions.
      • Prior to installation, place the hexagon nut in the optimal position (the drive-in pin projects by approx. 3 mm out of the hexagon nut).
      • When applying the torque, the cone bolt is pulled into the expansion clip and expands it against the drill hole wall.
      • The head embossing offers a simple control of the anchoring.
      • In the case of series installation, we recommend using the FABS bolt anchor setting tool.
      Installation FBN II
      1 / 5
      • 1
        Installation FBN II
      • 2
      • 3
      • 4
      • 5

      Technical data

      ETA-approval
      Drill diameter (
      d0
      )      		12 mm
      Min. drill hole depth for through fixings (
      h2
      )      		285 mm
      Anchor length 294 mm
      Max. usable length hef,max./hef,min. (
      tfix
      )      		200 / 215 mm
      Thread (
      Ø x length
      )      		M12 x 189 mm
      Width across nut 19 mm
      Washer (outer diameter x thickness) 44 x 4 mm
      Packaging Folding box
      Amount 10 St.
      GTIN (EAN-Code) 4006209455852

      Documents for download

      • ETAs and DoPs
      • Sales materials
      ETA Certification Document
      pdf, ETA-07/0211
      European Technical Assessment for fischer Bolt Anchor FBN II, FBN II R - Mechanical fastener for use in concrete
      Created on 07/13/2020
      DOP - Declaration of Performance
      pdf, DoP No. 0192
      Declaration of Performance for fischer Bolt Anchor FBN II, FBN II R (Mechanical anchor for use in concrete)
      Created on 07/27/2020
      cd-green-64c8fdbcdb-wwzx7