• Products
  • Service
  • Company
Bolt anchor FBN II
  • Product Picture: "fischer bolt anchor FBN II 16/100 hot-dip galvanised"
  • Application Picture
  • Application Picture
  • Application Picture
    • Application Picture
    • Product Picture
    • Application Picture
    • Application Picture
      Art.-No. 507554

      fischer bolt anchor FBN II 16/100 hot-dip galvanised

      Product variants
      Download of image data
      Top Features
      • With assessment document (ETA) the hot dipped galvanised steel version is covered for external use with variable working life depending on environment and corrosion conditions.
      • The FBN II achieves maximum load-bearing capacity with standard anchorage depth. This means: fewer fixing points and smaller anchor plates.
      • If the reduced anchorage depth is used, then this lowers the drill hole depth and simplifies installation.
      • Component tolerances are balanced out with the long thread. In addition, FBN II is also suitable for stand-off installations. This increases flexibility.
      • Simple assembly due to few taps and minimal slippage.

      The advantages / Product description

      The cost-efficient fixing made of hot-dip galvanised steel for use in non-cracked concrete.
      Advantages
      • The standard anchorage depth achieves the maximum load-bearing capacities. This means that fewer fixing points and smaller anchor plates are required.
      • The reduced anchorage depth reduces the drill hole depth. This minimises the amount of time needed for installation whilst increasing flexibility.
      • The first bolt anchor with variable working life covers the usage of bolt anchors in wet conditions and outdoor areas.
      • The long thread balances component tolerances and stand-off installations, and thus increases flexibility.
      • Fewer hammer blows and the minimal torque slippage allow for a noticeably simpler assembly.
      • The drive-in pin protects the threaded screw from damage, and as such ensures a faster installation and dismantling of the fixture.
      The fischer bolt anchor FBN II is a steel anchor for cost-effective fixings in non-cracked concrete. Due to the long thread and the two anchorage depths, the fischer bolt anchor FBN II can be used in a particularly flexible manner. The bolt anchor is also suitable for stand-off installation as well as pre-positioned and in push-through installation. The stainless steel version of the bolt anchor is suitable for fixing façade sub-structures, consoles, and ladders in external areas.

      Application and approval

      Applications
      • Steel constructions
      • Guard rails
      • Consoles
      • Ladders
      • Machines
      • Gates
      • Façades
      Building materials
      Approved for:
      • Concrete C20/25 to C50/60, non-cracked
      Also suitable for:
      • Concrete C12/15
      • Natural stone with dense structure
      You can find detailed information on building materials in the registration document.
      Approvals
      • ETA-07/0211
      • ETA-18/0101
      • DoP No. 0098
      • DoP No. 0268

      Assembly instruction

      Functioning
      • The FBN II is suitable for pre-positioned and push-through installation; also suitable for stand-off installation under certain conditions.
      • Prior to installation, place the hexagon nut in the optimal position (the drive-in pin projects by approx. 3 mm out of the hexagon nut).
      • When applying the torque, the cone bolt is pulled into the expansion clip and expands it against the drill hole wall.
      • The head embossing offers a simple control of the anchoring.
      • In the case of series installation, we recommend using the FABS bolt anchor setting tool.
      Installation FBN II
      1 / 5
      • 1
        Installation FBN II
      • 2
      • 3
      • 4
      • 5

      Technical data

      ETA-approval
      Drill diameter (
      d0
      )      		16 mm
      Min. drill hole depth for through fixings (
      h2
      )      		204 mm
      Anchor length 218 mm
      Max. usable length hef,max./hef,min. (
      tfix
      )      		100 / 115 mm
      Thread (
      Ø x length
      )      		M16 x 164 mm
      Width across nut 24 mm
      Packaging Folding box
      Amount 10 St.
      GTIN (EAN-Code) 4048962087376

      Documents for download

      • ETAs and DoPs
      • Technical documents
      • Sales materials
      ETA Certification Document
      pdf, ETA-07/0211
      European Technical Assessment for fischer Bolt Anchor FBN II, FBN II R - Mechanical fastener for use in concrete
      Created on 07/13/2020
      ETA Certification Document
      pdf, ETA-18/0101
      European Technical Assessment for fischer Bolt Anchor FBN II HDG Torque controlled expansion anchor - Mechanical fasteners of sizes M8, M10, M12, M16 and M20 for use in uncracked concrete
      Created on 07/16/2018
      DOP - Declaration of Performance
      pdf, DoP No. 0268
      Declaration of Performance for fischer Bolt Anchor FBN II, FBN II R (Mechanical anchor for use in concrete)
      Created on 01/20/2021
      DOP - Declaration of Performance
      pdf, DoP No. 0098
      Declaration of Performance for fischer Bolt Anchor FBN II HDG (Metal anchors for use in concrete with variable working life (heavy-duty type))
      Created on 07/23/2018
      cd-green-58bb58464c-mbzdk