• Products
  • Service
  • Company
Nail anchor FNA II M6
  • Product Picture: "fischer Nail anchor FNA II 6 x 30 M6/5 electro zinc plated"
  • Application Picture
  • Application Picture
    • Application Picture
    • Product Picture
    • Application Picture
      Art.-No. 44109

      fischer Nail anchor FNA II 6 x 30 M6/5 electro zinc plated

      Product variants
      Download of image data
      Top Features
      • Hammerset installation saves time.
      • No reinforcement hits due to low anchorage depth This saves time and costs during series installation.
      • Expansion clip provides a firm hold.
      • ETA approval for multiple fixings.

      The advantages / Product description

      The installation-friendly Hammerset anchor with thread and flange nut for multiple fixings.
      Advantages
      • Easy removal of fire protection board without damage.
      • Reusability of fire protection board.
      • Safe anchorage, particularly when exposed to vibration, wind, and pushing/pulling influences.
      • Low anchoring depth (30 mm).
      • Convenient installation without torque-controlled setting tool.
      • Approved system that has proven itself one million times over.
      The fischer nail anchor FNA II with thread and flange nut is made of zinc-plated steel. The FNA II is set in a time-saving manner in the push-through or pre-positioned installation with just a few taps of the hammer. The installed FNA II expands automatically under load. The cone is then pulled into the expansion clip and expands it against the hole wall. Above all, the fischer nail anchor FNA II with thread and flange nut is suitable for fixing metal clamps for conduits and pipes in internal areas.

      Application and approval

      Applications
      • Fire protection plates
      • Fire protection boards
      • Ventilation systems
      • Wire and Nonius hangers
      • Mounting rails
      • Metal clamps
      • Substructures made of wood and metal
      Building materials
      • Concrete C12/15 to C50/60, cracked and non-cracked
      • For multi-point fixings of non-load-bearing systems
      You can find detailed information on building materials in the registration document.
      Approvals
      • ETA-06/0175
      • DoP No. 0235
      • GS 6.1/21-076-1

      Assembly instruction

      Functioning
      • The washer significantly increases the pulling forces and, at the same time, prevents the damage of the panel during removal.
      • Removal by means of easy pinching off of nail head thanks to special 2-stage pliers.
      • For fast installation, use the compressed air setting device (item no. 093731).
      Pre-positioned installation FNA II M6
      1 / 4
      • 1
        Pre-positioned installation FNA II M6
      • 2
      • 3
      • 4
      Push-through installation FNA II M6
      1 / 4
      • 1
        Push-through installation FNA II M6
      • 2
      • 3
      • 4

      Technical data

      ETA-approval
      Anchor length 50 mm
      Drill diameter (
      d0
      )      		6 mm
      Min. drill hole depth for through fixings (
      h2
      )      		45 mm
      Max. fixture thickness (
      t fix
      )      		5 mm
      Thread (
      M
      )      		M6
      Width across nut 10 mm
      Packaging Folding box
      Amount 100 St.
      GTIN (EAN-Code) 4006209441091

      Documents for download

      • ETAs and DoPs
      • Approvals and Certificates
      • Technical documents
      ETA Certification Document
      pdf, ETA-06/0175
      European Technical Assessment for fischer Nail anchor FNA II - Load controlled expansion anchor for multiple use for non-structural applications in concrete
      Created on 03/02/2021
      DOP - Declaration of Performance
      pdf, DoP No. 0235
      Declaration of Performance for fischer Nail anchor FNA II (Mechanical fastener for use in concrete)
      Created on 03/16/2021
      cd-blue-c6785f99-ht6vq