P-wall holder with fixing points on both sides.

Wall holders FPH

This system allows the user to compensate the tolerance of the substrate. Wall holders and vertical profiles are attached using connectors (such as blind rivets). The wall holders are attached to the substrate using steel anchors or frame anchors.

Produktvarianten

Download of image data

Produktvarianten

10 Produktvarianten

Length

Height

System

Amount

GTIN (EAN-Code)

Gesehen 10 von 10 Variante(n)

Advantages

The wall holder is used to absorb and transfer the loads applied to the façade system.
They compensate the tolerance of the substrate.
Available as fixed and sliding point anchors.
Absorption of thermal longitudinal expansion through slots on the sliding point anchor.

Applications

As a wall holder for subframe systems in rainscreen facades

Functioning

Vertical load transfer.
Absorption of higher loads through double-sided attachment.
Tolerance compensation for structural tolerances.
Easy installation with attachments on both sides.

Installation FPH AL

1 / 4

1
2
3
4

Length	30 mm
Height ( H )	180 mm
System	—
Amount	40 St.
GTIN (EAN-Code)	4006209184424

Length	30 mm
Height ( H )	60 mm
System	—
Amount	100 St.
GTIN (EAN-Code)	4006209184431

Length	54 mm
Height ( H )	180 mm
System	—
Amount	40 St.
GTIN (EAN-Code)	4006209184448

Length	54 mm
Height ( H )	60 mm
System	—
Amount	100 St.
GTIN (EAN-Code)	4006209184455

Length	68 mm
Height ( H )	180 mm
System	—
Amount	30 St.
GTIN (EAN-Code)	4006209489000

Wall holders FPH

Produktvarianten

Die Vorteile / Produktbeschreibung

Anwendung und Zulassung

Montageanleitung

Length	93 mm
Height ( H )	60 mm
System	—
Amount	75 St.
GTIN (EAN-Code)	4006209489031

Length	133 mm
Height ( H )	180 mm
System	—
Amount	24 St.
GTIN (EAN-Code)	4006209303672