Nr art. 18442

fischer wall holder FPH 30

Top Features
  • Pi-shaped wall holder for high loads.
  • Use as fix point.
  • Easy installation due to pre-drilled holes.

Korzyści /opis produktu

Wall holder as fixed point
Advantages
  • The wall holder is used to absorb and transfer the loads applied to the façade system.
  • They compensate the tolerance of the substrate.
  • Available as fixed and sliding point anchors.
  • Absorption of thermal longitudinal expansion through slots on the sliding point anchor.
The Pi-wall holder of the subframe system ATK SystemOne made of aluminum is the basis for a façade subframe. It is fastened to the building substrate using fischer fixings. To reduce thermal bridges, thermostops made of hard-PVC can be attached to back of the wall holders. In order to enable all common insulation thicknesses and façade offsets, the wall holders are designed and manufactured in different projection lengths. To allow the thermal expansion of the profiles, the wall holders are used both as fixed and sliding points. The fixed point absorbs the entire dead loads of the façade panels and subframe system in addition to the proportional wind loads.
Properties
  • Aluminum (e. g. EN AW 6063, 6061)

Zastosowanie i aprobata

Applications
  • As a wall holder for subframe systems in rainscreen facades
Building materials
  • All building substrates
* Szczegółowe informacje na temat znajdziesz w dokumencie rejestracji.

Instrukcja montażu

Functioning
  • Vertical load transfer from the subframe system into the building substrate
  • Absorption of higher loads through double-sided attachment
  • Compensation for structural tolerances
  • Easy installations with attachments on both sides
Installation FPH AL
1 / 4

Dane techniczne

Length 30 mm
Height (
H
)
180 mm
System
Amount 40 St.
GTIN (EAN-Code) 4006209184424
cd-green-58bb58464c-ppkw9